I thought I had already started this thread, but can't find it...
Anyway - while gloss coats are drying on the Hs 129 and the EJ Kai, I've made some progress on the Fiesler. Lots of elbow grease, fuselage closed up (with pilot inside - had to go in first or he wouldn't fit), bottom wing on with loads of putty, all panel lines had to be rescribed, tail and stabs on with PE brace, drilled intake and added PE to the exhausts, built up the PE bomb rack (not pictured), and added the wing struts. Now I'm working on the vac canopy (it doesn't fit quite right - so going to have to improvise some improvements to the canopy rim to help the two come together), and figuring out how I'm going to set up for the rigging, then will paint before the upper wing is added.
Done! A coupe of pics below. For all pics and full write-up, here's the iModeler post: https://imodeler.com/2020/10/pavla-1-72-fieseler-fi-167/
Rigging almost done. Here the outside sections of the wings are done - need to put on the top wing, then insert the cabane struts to finish.